Start here
Which standard applies to your project is decided by where the equipment will be installed, not by what it is made of. Europe uses EN 1176 for play equipment, EN 16630 for outdoor fitness and EN 15567 for commercial rope courses; the United States uses ASTM F1487, ASTM F3101 and ACCT respectively. These are different standards with different numerical requirements, and compliance with one does not imply compliance with another.
EN 1176 is the European standard series for playground equipment. It has seven parts covering general safety, swings, slides, runways, carousels, rocking equipment and spatial networks, and it is the standard referenced in European public procurement.
Read the guide →ASTM F1487 is the US consumer safety performance specification for public playground equipment. It differs from EN 1176 in its use-zone rules, its slide angle limits and its approach to accessibility, so compliance with one does not imply compliance with the other.
Read the guide →EN 1176 is the European playground standard and ASTM F1487 is the US one. The practical differences are in use-zone calculation, merged use zones, slide angle limits and accessibility requirements — and equipment compliant with one is generally not compliant with the other.
Read the guide →EN 15567 is the European standard for ropes courses. Part 1 covers construction and part 2 covers operation, and it applies instead of EN 1176 because a commercial ropes course is an operated attraction rather than children's play equipment.
Read the guide →EN 16630 is the European standard for permanently installed outdoor fitness equipment. It applies instead of EN 1176, and its core requirements — limited range of motion and resistance that cannot suddenly disengage — follow from the assumption of unsupervised public use.
Read the guide →These guides are written to help buyers and specifiers understand which standard applies to their project and what it requires. They are not a substitute for the standards themselves, which are published by CEN, ASTM International and ACCT and should be obtained from the issuing body. Standards are revised periodically; the review date is shown on each page.
Tell us the country of installation and the type of project. We will confirm the applicable standard and what test documentation we can provide.